Solenoid driver board. Control traditional solenoid turnout motors. See below for details.
Please note before ordering: Shipping is calculated and VAT (where applicable) added to your order at time of checkout.
MegaPoints Servo Controller £60.00 inc VAT.
12 points/turnouts/semaphore signals, gates, barriers or doors from a single board.
board can control up to 12 R/C servos to operate points, gates,
barriers, doors, crossings or semaphore signals in fast or slow smooth
operation. Includes the following features: Multiple memories, network
interface, master/slave paring, adjustable speed, direction and
for fine point adjustment and tuning over each channel individually.
Click image for more details.
Controllable from your Arduino or Raspberry Pi. See hackers guide for details.
Back in stock for next day shipping.
MegaPoints DCC Module £30.00 inc VAT.
12 /192 DCC accessory addresses
Provides a DCC connection for the MegaPoints Controller when used in simple mode giving each of the 12 channels a DCC accessory address. In gateway mode the unit provides 192 DCC accessory addresses and connects to the MegaPoints data bus. Best with an NMRA complient controller (thats just about everything in the last 10 years). Also works with some older legacy controllers such as the early Hornby Select.
Video preview here.
MegaPoints Solenoid Controller £33.00 inc VAT.
Control up to six legacy solenoid turnout motors from a single board.
If you have traditional solenoid
will allow you to control them.
This intelligent control board
is powered from any 12 - 24 volt AC or DC power
source (16 volts is ideal) and should not be used with a CDU
as this board
makes them redundant. You are free to toggle the solenoid motors as
fast and as
often as you like as there's no capacitor to charge up. Any attempts to
more then one output at the same time will cause them to switch in
You are free to mix solenoids, servos, Tortoise type stall motors or relays with any combination of this and other control boards in our range.
Available now in limited numbers.
MegaPoints MultiPanel - Mimic Control Panel
Connect all MegaPoints to one or more mimic panels
Limited availability from March 2015.
Create one or more interconnected mimic panels for your layout that allows sharing all track controls. The Multi Panel reduces cabling by connecting to the MegaPoints network allowing a single cable to connect all MegaPoints devices. Easily expands in units of 24 up to 192 points or servo controlled devices.
Multiple panels can share control and instantly communicate changes to all other panels so that other operators are kept up to date.Click the image for more detail.
MultiPanel Components are listed below. Before buying drop me an email with a description of what you are trying to achieve and ill help ensure you have the correct components.
Shipping: Orders placed before midday are posted first class same working day. Orders placed after this will be posted next working day.
If you are a club in the North West of the UK (max 1 hour drive from Northwich) and wish to arrange a visit on a club night, drop me an email (address in any user guide). I can bring the MegaPoints range and let your club members have a closer look and have time to answer more in depth questions.
MegaPoints Controllers VAT registration number: 249 9698 26.